High Level Disinfection

02 Jul 2018//Comments Off on High Level Disinfection
High Level Disinfection
A high level sterilization is a good standard for preparing a semi-critical semi-critical medical device that is sensitive to heat and disables all microorganisms and spores of bacteria. Few disinfectants are capable of eliminating spores when used for long periods of time (3-12 hours), which are referred to as “sterilizing chemicals”. At a similar concentration, but shorter periods (45 minutes or less), the same disinfectant has the ability to eliminate all microorganisms other than spores, in which case they are called high level disinfectants.

 

In fact, sterilization involves the use of physical or chemical methods to eliminate and degrade all forms of organisms, including spores. High-disinfection means are chemical sterilizers that should be used in accordance with the recommended instructions, the compounds of this category Solutions include glutaraldehyde, peracetic acid, thickened peroxide (30%), thickened sodium hypochlorite and a high concentration of perchlorin. All devices that are in contact with mucous membranes and non-edematous skin include respiratory and anesthetic therapies, endoscopes, blades Laryngoscope, manometer props and anurk manometric catheters These products must be free of all microorganisms so that membranes that are susceptible to all types of germs are not infected and therefore require high levels of disinfection. The Swiss Borer spray provides solutions Deconex disinfectants with VAH and German DGHM approvals of the best quality and shortest duration.

 
   Armanbehboud Company
The exclusive distributor of Deconex products, in several provinces, is proud to provide HIGH LEVEL disinfection solutions to improve the health and control of hospital infections.
 
 Solution 54sporecide Based on glutaraldehyde

 

محلول  54sporecide It is made of glutaraldehyde 5% because of its high antimicrobial activity at 10 minutes and antispasmodic property in 60 minutes. This solution is ready for use without the need for activating substances, and if it does not change the color and change, and there is no clear nuisance, such as mucosa, blood clot, etc., it can hold up to 35 days.

 

glutaraldehyde is one of the most effective and most disinfectant disinfectants. In general, glutaraldehyde tends to become circular. For & nbsp; The adequacy of its operation and its stability should be fixed in a linear fashion, which is possible by binding the surfactants to the third carbon-glutaraldehyde, and by fixing the glutaraldehyde, the dependence of the function is also adjusted to PH . Due to the prohibition of formaldehyde, use of glutaraldehyde is permitted under certain conditions. COSSH1 and according to the World Health Commission’s announcement, the maximum permitted level of glutaraldehyde in space is determined using products containing glutaraldehyde in their compounds 5% PPM . The use of formalin plus potassium permanganate will not be economically feasible in addition to producing toxicity issues. Glutaraldehyde can be considered a suitable substitute for formaldehyde. % Is a solution in the 20 to 90 of the high-temperature sensitive device ( HLD ) and disperse within 6 to 10 the clock will be sterilized. The most commonly used are glutaraldehyde, disinfection of endoscopes, spectators, anesthetics, respiratory and surgical supplies. This solution is activated with a sodium nitrite activating solution, and after activation, the color of the flower is greenish. The active solution can be used up to 28 days. Nitrite to prevent corrosion of metals. Therefore, activated glutaraldehyde is suitable for disinfection of metal materials.

مSolution HLDPA/PA20 Based on acid peracetic acid

 

Another high-quality disinfectant solution deconex  ،  HLDPA Based on & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; Acidic Acid *, it has an antimicrobial and antispasmodic effect in 5 minutes and has no unpleasant odor. This solution destroys virusesHIV و HBVThe virus was spread over 15 minutes  Adenoو PolioOvercomes Capacity up to 14 days.
* Peracetic Acid at low concentrations ( 50ppm ) in pantyhose as dexamethasone and at 1% concentration even as a sterilizing agent.

 

Collector: Farzaneh Bahrami